Monday, December 14, 2009
Computer programming
Computer programming is the iterative process of writing or editing source code. Editing source code involves testing, analyzing, and refining, and sometimes coordinating with other programmers on a jointly developed program. A person who practices this skill is referred to as a computer programmer or software developer. The sometimes lengthy process of computer programming is usually referred to as software development. The term software engineering is becoming popular as the process is seen as an engineering discipline.
Usage of Transistor
The bipolar junction transistor, or BJT, was the most commonly used transistor in the 1960s and 70s. Even after MOSFETs became widely available, the BJT remained the transistor of choice for many analog circuits such as simple amplifiers because of their greater linearity and ease of manufacture. Desirable properties of MOSFETs, such as their utility in low-power devices, usually in the CMOS configuration, allowed them to capture nearly all market share for digital circuits; more recently MOSFETs have captured most analog and power applications as well, including modern clocked analog circuits, voltage regulators, amplifiers, power transmitters, motor drivers, etc.
Importance of Transistor
The transistor is considered by many to be one of the greatest inventions of the twentieth century.The transistor is the key active component in practically all modern electronics. Its importance in today's society rests on its ability to be mass produced using a highly automated process (fabrication) that achieves astonishingly low per-transistor costs.
Although several companies each produce over a billion individually-packaged (known as discrete) transistors every year,the vast majority of transistors produced are in integrated circuits (often shortened to IC, microchips or simply chips) along with diodes, resistors, capacitors and other electronic components to produce complete electronic circuits. A logic gate consists of up to about twenty transistors whereas an advanced microprocessor, as of 2006, can use as many as 1.7 billion transistors (MOSFETs)."About 60 million transistors were built this year [2002] ... for [each] man, woman, and child on Earth."
The transistor's low cost, flexibility, and reliability have made it a ubiquitous device. Transistorized mechatronic circuits have replaced electromechanical devices in controlling appliances and machinery. It is often easier and cheaper to use a standard microcontroller and write a computer program to carry out a control function than to design an equivalent mechanical control function.
Although several companies each produce over a billion individually-packaged (known as discrete) transistors every year,the vast majority of transistors produced are in integrated circuits (often shortened to IC, microchips or simply chips) along with diodes, resistors, capacitors and other electronic components to produce complete electronic circuits. A logic gate consists of up to about twenty transistors whereas an advanced microprocessor, as of 2006, can use as many as 1.7 billion transistors (MOSFETs)."About 60 million transistors were built this year [2002] ... for [each] man, woman, and child on Earth."
The transistor's low cost, flexibility, and reliability have made it a ubiquitous device. Transistorized mechatronic circuits have replaced electromechanical devices in controlling appliances and machinery. It is often easier and cheaper to use a standard microcontroller and write a computer program to carry out a control function than to design an equivalent mechanical control function.
History of the transistor
Physicist Julius Edgar Lilienfeld filed the first patent for a transistor in Canada in 1925, describing a device similar to a Field Effect Transistor or "FET".However, Lilienfeld did not publish any research articles about his devices,[citation needed] and in 1934, German inventor Oskar Heil patented a similar device.
In 1947, John Bardeen and Walter Brattain at AT&T's Bell Labs in the United States observed that when electrical contacts were applied to a crystal of germanium, the output power was larger than the input. Solid State Physics Group leader William Shockley saw the potential in this, and over the next few months worked to greatly expand the knowledge of semiconductors, and thus could be described as the "father of the transistor". The term was coined by John R. Pierce.According to physicist/historian Robert Arns, legal papers from the Bell Labs patent show that William Shockley and Gerald Pearson had built operational versions from Lilienfeld's patents, yet they never referenced this work in any of their later research papers or historical articles.
The first silicon transistor was produced by Texas Instruments in 1954.This was the work of Gordon Teal, an expert in growing crystals of high purity, who had previously worked at Bell Labs.The first MOS transistor actually built was by Kahng and Atalla at Bell Labs in 1960.
In 1947, John Bardeen and Walter Brattain at AT&T's Bell Labs in the United States observed that when electrical contacts were applied to a crystal of germanium, the output power was larger than the input. Solid State Physics Group leader William Shockley saw the potential in this, and over the next few months worked to greatly expand the knowledge of semiconductors, and thus could be described as the "father of the transistor". The term was coined by John R. Pierce.According to physicist/historian Robert Arns, legal papers from the Bell Labs patent show that William Shockley and Gerald Pearson had built operational versions from Lilienfeld's patents, yet they never referenced this work in any of their later research papers or historical articles.
The first silicon transistor was produced by Texas Instruments in 1954.This was the work of Gordon Teal, an expert in growing crystals of high purity, who had previously worked at Bell Labs.The first MOS transistor actually built was by Kahng and Atalla at Bell Labs in 1960.
Usage of Vacuum Tube
Vacuum tubes were critical to the development of electronic technology, which drove the expansion and commercialization of radio broadcasting, television, radar, sound reproduction, large telephone networks, analog and digital computers, and industrial process control. Some of these applications pre-dated electronics, but it was the vacuum tube that made them widespread and practical.
For most purposes, the vacuum tube has been replaced by solid-state devices such as transistors and solid-state diodes. Solid-state devices last much longer, are smaller, more efficient, more reliable, and cheaper than equivalent vacuum tube devices. However, tubes are still used in specialized applications: for engineering reasons, as in high-power radio frequency transmitters; or for their aesthetic appeal and distinct sound signature, as in audio amplification. Cathode ray tubes are still used as display devices in television sets, video monitors, and oscilloscopes, although they are being replaced by LCDs and other flat-panel displays. A specialized form of the electron tube, the magnetron, is the source of microwave energy in microwave ovens and some radar systems. The klystron, a powerful but narrow-band radio-frequency amplifier, is commonly deployed by broadcasters as a high-power UHF television transmitter.
For most purposes, the vacuum tube has been replaced by solid-state devices such as transistors and solid-state diodes. Solid-state devices last much longer, are smaller, more efficient, more reliable, and cheaper than equivalent vacuum tube devices. However, tubes are still used in specialized applications: for engineering reasons, as in high-power radio frequency transmitters; or for their aesthetic appeal and distinct sound signature, as in audio amplification. Cathode ray tubes are still used as display devices in television sets, video monitors, and oscilloscopes, although they are being replaced by LCDs and other flat-panel displays. A specialized form of the electron tube, the magnetron, is the source of microwave energy in microwave ovens and some radar systems. The klystron, a powerful but narrow-band radio-frequency amplifier, is commonly deployed by broadcasters as a high-power UHF television transmitter.
History of development of Vaxuum Tube
The 19th century saw increasing research with evacuated tubes, such as the Geissler and Crookes tubes. Scientists who experimented with such tubes included Eugen Goldstein, Nikola Tesla, Johann Wilhelm Hittorf, Thomas Edison, and many others. These tubes were mostly for specialized scientific applications, or were novelties, with the exception of the light bulb. The groundwork laid by these scientists and inventors, however, was critical to the development of vacuum tube technology.
Though the thermionic emission effect was originally reported in 1873 by Frederick Guthrie, it is Thomas Edison's 1884 investigation of the Edison Effect that is more often mentioned. Edison patented what he found, but he did not understand the underlying physics, or the potential value of the discovery. It wasn't until the early 20th century that this effect was put to use, in applications such as John Ambrose Fleming's diode used as a radio detector, and Lee De Forest's "audion" (now known as a triode) used in the first telephone amplifiers. These developments led to great improvements in telecommunications technology, particularly the first coast to coast telephone line in the US, and the birth of broadcast radio.
Though the thermionic emission effect was originally reported in 1873 by Frederick Guthrie, it is Thomas Edison's 1884 investigation of the Edison Effect that is more often mentioned. Edison patented what he found, but he did not understand the underlying physics, or the potential value of the discovery. It wasn't until the early 20th century that this effect was put to use, in applications such as John Ambrose Fleming's diode used as a radio detector, and Lee De Forest's "audion" (now known as a triode) used in the first telephone amplifiers. These developments led to great improvements in telecommunications technology, particularly the first coast to coast telephone line in the US, and the birth of broadcast radio.
vacuum tube
A vacuum tube consists of electrodes in a vacuum in an insulating heat-resistant envelope which is usually tubular. Many tubes have glass envelopes, though some types such as power tubes may have ceramic or metal envelopes. The electrodes are attached to leads which pass through the envelope via an airtight seal. On most tubes, the leads are designed to plug into a tube socket for easy replacement.
The simplest vacuum tubes resemble incandescent light bulbs in that they have a filament sealed in a glass envelope which has been evacuated of all air. When hot, the filament releases electrons into the vacuum: a process called thermionic emission. The resulting negatively charged cloud of electrons is called a space charge. These electrons will be drawn to a metal plate inside the envelope, if the plate (also called the anode) is positively charged relative to the filament (or cathode). The result is a flow of electrons from filament to plate. This cannot work in the reverse direction because the plate is not heated and does not emit electrons. This very simple example described can thus be seen to operate as a diode: a device that conducts current only in one direction. The vacuum tube diode conducts conventional current from plate (anode) to the filament (cathode); this is the opposite direction to the flow of electrons (called electron current).
Vacuum tubes require a large temperature difference between the hot cathode and the cold anode. Because of this, vacuum tubes are inherently power-inefficient; enclosing the tube within a heat-retaining envelope of insulation would allow the entire tube to reach the same temperature, resulting in electron emission from the anode that would counter the normal one-way current. Because the tube requires a vacuum to operate, convection cooling of the anode is typically not possible. Instead anode cooling occurs primarily through black-body radiation and conduction of heat to the outer glass envelope via the anode mounting frame. Cold cathode tubes do not rely on thermionic emission at the cathode and usually have some form of gas discharge as the operating principle; such tubes are used for lighting (neon lamps) or as voltage regulators.
The vacuum tube is a voltage-controlled device, with the relationship between the input and output circuits determined by a transconductance function. The voltage between the control grid and the cathode controls the amount of current in the tube that goes from cathode to anode. Control grid current is practically negligible in most circuits. The solid-state device most closely analogous to the vacuum tube is the JFET, although the vacuum tube typically operates at far higher voltage (and power) levels than the JFET.
The simplest vacuum tubes resemble incandescent light bulbs in that they have a filament sealed in a glass envelope which has been evacuated of all air. When hot, the filament releases electrons into the vacuum: a process called thermionic emission. The resulting negatively charged cloud of electrons is called a space charge. These electrons will be drawn to a metal plate inside the envelope, if the plate (also called the anode) is positively charged relative to the filament (or cathode). The result is a flow of electrons from filament to plate. This cannot work in the reverse direction because the plate is not heated and does not emit electrons. This very simple example described can thus be seen to operate as a diode: a device that conducts current only in one direction. The vacuum tube diode conducts conventional current from plate (anode) to the filament (cathode); this is the opposite direction to the flow of electrons (called electron current).
Vacuum tubes require a large temperature difference between the hot cathode and the cold anode. Because of this, vacuum tubes are inherently power-inefficient; enclosing the tube within a heat-retaining envelope of insulation would allow the entire tube to reach the same temperature, resulting in electron emission from the anode that would counter the normal one-way current. Because the tube requires a vacuum to operate, convection cooling of the anode is typically not possible. Instead anode cooling occurs primarily through black-body radiation and conduction of heat to the outer glass envelope via the anode mounting frame. Cold cathode tubes do not rely on thermionic emission at the cathode and usually have some form of gas discharge as the operating principle; such tubes are used for lighting (neon lamps) or as voltage regulators.
The vacuum tube is a voltage-controlled device, with the relationship between the input and output circuits determined by a transconductance function. The voltage between the control grid and the cathode controls the amount of current in the tube that goes from cathode to anode. Control grid current is practically negligible in most circuits. The solid-state device most closely analogous to the vacuum tube is the JFET, although the vacuum tube typically operates at far higher voltage (and power) levels than the JFET.
Subscribe to:
Posts (Atom)
